Barrel Mouth Parts And Gasket Influence On Drum Leakage
The flange
(1) Material cause. When producing flanges, due to multiple stamping and stretching, the strength of steel plates with high carbon content varies, hardness increases and cracks occur at the flange mouth when riveting and pressing.
(2) The flange material is too thin. When the thickness of the strip is less than or equal to 2.6mm, the thickness of the flanging part of the flange mouth becomes thinner, and the mechanical strength of the flange mouth after riveting and locking is weakened. When the pressure in the steel drum increases to the specified value, leakage occurs.
The thread of the flange is not perpendicular to the axis. When the plug is screwed into the flange, the sealing ring on the plug is not balanced, resulting in leakage at the barrel mouth.
2. The sealing gasket
Sealing gasket is an important factor to ensure the sealing performance of two ports. In production, if the selection and improper treatment will cause leakage.
First, the material of the sealing gasket should be adapted to the contents of the steel drum and has the advantages of corrosion resistance, impact resistance and flexible bremsstrahlung.
Second, the size should conform to the standard. The inner hole of the gasket is too large, the flange is not positioned properly and the seal is not strict. The liner inner hole is too small, installation is difficult, easy to fracture when riveting. At present, the barrel with sealing gasket manufacturers, specifications and shapes. Only section shape has square, rectangle, oblate, round; The section of the same factory for the circular sealing gasket, and can be divided into φ2.5mm and φ3.2mm and other specifications.
Short comments: It is very necessary to select the factory for full inspection of the products. Our Xuheng Metal is the factory for strict full inspection to prevent leakage caused by flange and apron problems.
Overview Of National Packaging Industry Operation In 2020July 1, 2022In 2020, there will be 8,183 enterprises above scale in China's packaging industry (all industrial legal person enterprises with an annual revenue of 20 million yuan or above), 267 more than last ...view
The Oil Is Contaminated. Where's The Source?July 1, 2022In the process of engine operation, there may be fuel dilution, coolant leakage, excessive wear and other problems, these problems will cause some pollution and influence to the lubrication system, wh...view
Malaysia Maintains Anti-dumping Duty On Color Coated SteelJuly 1, 2022The Ministry of International Trade and Industry of Malaysia has decided to continue imposing anti-dumping duties on pre-painted, painted or color-coated steel coils originating from China and Vietnam...view
Kinds Of Drum Closure Gasket3July 1, 20227. CR neoprene sealing ringSunlight and weather resistance is especially good.Not afraid of dichlorodifluoromethane and ammonia and other refrigerants, resistance to dilute acid, silicone grease lubri...view