In the process of paint construction, excessive paint in vertical or inclined areas and the formation of top-down flow traces or local film thickening flow falling phenomenon is called flow hanging.
The reasons are as follows:
1) The viscosity of the coating is too low;
2) spit out the amount (also called the amount of paint) is too large;
3) Paint film is too thick;
4) The construction environment temperature is too low, and the air humidity is large;
5) Improper spraying method;
6) The air pressure is too small, and the paint is not well atomized.
Solution:
1) Add thickener to increase the viscosity of the coating;
2) Reduce the spit amount;
3) Increase the production speed and reduce the output;
4) Improve the temperature of the spray room and reduce the humidity of the spray room;
5) Standard spraying method;
6) Increase air pressure.
Short comments: In the process of painting coated drum closure, the phenomenon of stream-hanging may also occur, but the automatic detection machine can directly detect it.
Drum ClosureJune 5, 2023Closures are devices and techniques used to close or seal a bottle, jug, jar, tube, can, etc. Drum closures are used to close and seal drum or barrel. Closures can be a cap, cover, lid, plug, etc. Dru...view
What Types Of Motor Oil Are There?July 1, 2022What are the commonly used lubricating oil additives?With the progress of machinery and the development of automobile internal combustion engine, higher requirements are put forward on the load, speed...view
Benefits and Advantages of Plastic Barrels and IB Ton BarrelsNovember 10, 2023Plastic barrelsAre you looking for barrels that can store chemicals, food, drugs, etc.? Polyethylene barrels, also known as plastic barrels, are a great choice for you. Here are some things you need t...view
Materials Used in Barrel Cap SealsFebruary 5, 2024When it comes to the safe storage and transportation of liquids, one essential component that often goes unnoticed is the barrel cap seal. These seals not only provide protection against leakage but a...view
Issuing Of The Latest Standards For SprayingJuly 4, 2022Since February 1, 2021, will formally begin to implement the national standard "low volatile organic matter content coating product technical requirements", to the industrial protection of w...view