The uneven appearance of the paint coating, which resembles the peel of an orange or walnut, is called orange peel.
The reasons are as follows:
1) The construction viscosity is too high and the paint film leveling is poor;
2) Improper selection of spray gun;
3) High temperature and low humidity in the spray room;
4) Insufficient leveling time and premature entry into the drying room;
5) Spraying film is too thick or too thin
Solutions:
1) Add pure water to adjust the coating viscosity;
2) Standardize the spray gun, or adjust the spraying distance, fan width, etc.;
3) Reduce the temperature of the spray room, improve the humidity of the spray room;
4) Increase leveling time;
5) Adjust the amount of spit and gun speed to prevent the paint film thickness beyond the specified range.
Short comments: in the process of painting epoxy phenolic drum closures, the orange peel probelm will also occur, but with small probability, we will check each closures for customers.
Weak Demand, Next Week Steel Prices Or High Shock RunJuly 1, 2022Cold rolling: this week, the national cold rolling prices were raised by a narrow range, the general market transaction.Fundamentally, the cold rolling production week on week decreased significantly,...view
Development of Steel Drum Industry in Different RegionsApril 10, 2023Japan (JSDA)Approximately 85% of steel drums in the Japanese market are used for chemicals. The Japan Steel Drum Association (JSDA) participated in TOKYO PACK 2022 exhibition for the first time to str...view