Today's article mainly introduces polypropylene, polyethylene (PE) is a thermoplastic resin produced by polymerization of ethylene.
Polyethylene odorless, non-toxic, feel like wax, has excellent low temperature resistance (minimum use temperature can reach -100~-70°C), good chemical stability, resistance to most acid and alkali erosion (not resistant to acid with oxidation properties). Insoluble in general solvents at room temperature, low water absorption, good electrical insulation.
Polyethylene can be processed in the same way as ordinary thermoplastics. It is widely used in the manufacture of films, packaging materials, containers, pipes, wire and cable, daily necessities, etc., and can be used as high frequency insulation materials for TV, radar, etc.
With the development of petrochemical industry, the production of polyethylene has developed rapidly, and the output accounts for about 1/4 of the total output of plastics. In 1983, the world's total polyethylene production capacity was 24.65 Mt, and the plant capacity under construction was 3.16 Mt. According to the latest statistics in 2011, the global production capacity reached 96 Mt, and the development trend of polyethylene production shows that production and consumption have gradually transferred to Asia, and China has increasingly become the most important consumer market.
The heat resistance of polyethylene is not high, and it is improved with the increase of relative molecular weight . Good low temperature resistance, brittle temperature can generally reach -50℃ below; And with the increase of relative molecular weight, the lowest can reach -140℃. The linear expansion coefficient of polyethylene is large, up to (20 ~ 24)×10-5/K. High thermal conductivity.
Because LDPE and HDPE have good fluidity, low processing temperature, moderate viscosity, low decomposition temperature, and do not decompose at a high temperature of 300 °C in the inert gas, it is a plastic with good processing performance. However, the viscosity of LLDPE is slightly higher, and the motor power needs to be increased by 20% to 30%; It is easy to break the melt, so it is necessary to increase the die gap and add processing AIDS. The processing temperature is slightly higher, up to 200 ~ 215℃. Polyethylene has low water absorption and does not need to be dried before processing.
Polyethylene products, such as polyethylene drum plugs, are easy to crystallize during cooling, so pay attention to mold temperature during processing. To control the crystallinity of the product, so that it has different properties. The molding shrinkage of polyethylene is large, which must be considered when designing molds.
Important Considerations When Selecting a Drum Cap Seal ManufacturerFebruary 5, 2024When it comes to sealing drums, it is imperative to have reliable drum cap seals in place. Drum cap seals serve as an essential barrier to prevent any leakage or tampering of the contents within the d...view
ISDI: What You Should Know When Purchasing New Steel DrumsJune 30, 20221. Steel drum manufacturers can manufacture steel drums according to the specifications you need.2. The user's product must be compatible with its packaging steel drum.3. You need to carefully che...view
Performance Characteristics of the Steel DrumOctober 25, 2023The application of steel drums has only a history of just over one hundred years, but it has developed rapidly and has a wide variety of types. It is widely used in industrial product packaging, trans...view
The Crucial Role of Oil Drum Caps in Preventing Leaks and SpillsJanuary 18, 2024If you work in an industry that deals with storage and transportation of liquids, particularly oil, you are likely well aware of the importance of preventing leaks and spills. One simple yet often ove...view