Suggestions On Risk Control Of Environmental Protection Reconstruction
In order to do a good job of risk control in environmental protection renovation, the following control measures are suggested:
1. Comprehensive and accurate identification of various risks in the process of exhaust gas recovery and treatment, control measures ahead.
2. Strengthen the risk assessment during the transformation of exhaust gas recovery facilities, to ensure that the risk is controllable, and then through the formal design, and strengthen the transformation construction management.
3. Compile the pilot production plan of the recycling facility when it is put into use, organize the pilot production scientifically.
4. When different tail gas mixtures are collected in a centralized manner, risk analysis should be carried out on the interaction between various tail gas to clarify the dangerous characteristics of tail gas. Verify and test the composition, risk, explosion limit, flash point and ignition point of tail gas to fully grasp the safety risk of tail gas and avoid reaction.
5. In the closed workshop, the gas collection hood, gas phase hose and other facilities should be used to recover the unorganized gas emissions, while maintaining good ventilation to reduce the local accumulation of volatiles.
6. Scientific interlock protection shall be carried out between the ignition device of the RTO, the collecting fan and the mixed gas emergency exhaust device. In case of ignition failure and insufficient combustion concentration of the mixed gas, the fan and check valve shall be interlocked to be cut off while the explosive mixed gas in the system is drained.
7. To waste of gas pipe (tail) back to the (fire) facilities for inspection and optimization, especially for workshop, regional, pipeline and RTO junction between parts such as area, shall organize experts to set up the check, the security risks of fire, explosion and other safety devices are identified and reasoning, on the premise of ensuring security Settings prevent burning (fire) one-way check back, fire damper, etc.
8. Oil storage enterprises can adopt nitrogen sealing measures to avoid direct oil contact with air and reduce VOCs escaping.
Sources Said Russia's Proposed Export Tax Would Hurt The IndustryJuly 1, 2022Russia's decision to apply a 15%duty on all major ferrous and non-ferrous metals exports for six months will adversely impact the industry and force Russian steel products from the global market, ...view
First Quarter Performance Review Of PetroChinaJuly 1, 2022Intensify exploration and development and strive to increase efficiency and output.The company made great efforts to stabilize oil and increase gas, and produced 373 million barrels of oil and gas equ...view
The Development Trend and Use of Closed Steel DrumsAugust 7, 2023With the further deepening of China's opening up to the outside world, the national standard steel drum has been restricted in export packaging. In recent years, a number of steel drum enterprises...view
Steel City Or Moderate Rebound This WeekJuly 1, 2022In general, there are several reasons: mills' profits have shrunk;Last week steel prices fell, the market has stabilized or even rebound demand;Domestic and foreign price trend split, the price ga...view
Packing materials for steel drumsApril 14, 2023Although the application of steel drum packaging materials is only more than a hundred years of history, but with the development of modern iron and steel industry, for industrial and agricultural dep...view
Kinds Of Drum Closure Gasket3July 1, 20227. CR neoprene sealing ringSunlight and weather resistance is especially good.Not afraid of dichlorodifluoromethane and ammonia and other refrigerants, resistance to dilute acid, silicone grease lubri...view