The top of the steel barrel should be set according to the type of opening, the mouth of the barrel or called the seal, the purpose is easy to open, easy to use, and to ensure that the contents do not leak.
Due to the different openings of each type of steel drum, the closing way of the opening parts of the drum is also different.
The same opening of the steel barrel used by the type of barrel mouth parts can also be different, which depends on the performance of the contents to decide.
The type of the closure：
(1) plug type
A plug with external thread and a top screw ring with internal thread form a seal consisting of a plug, a screw ring, a washer, a liner, and a cap for a small opening steel drum, as shown in figure 7-34(a).
(2) the screw cap type
A barrel cover structure with an internal and external screw cap is suitable for small opening steel drums and steel pails, as shown in figure 7-34(b).
Press the pressure type
(1) pressure type plug
It is suitable for use in small opening steel drums and drums through snap press and drum mouth sealing, as shown in figure 7-35(a).
(2) press the cap
Lap lock type elastic cover with serrated edge and sealing gasket can be combined with special pressure collar to form snap seal for small opening steel drums and barrels, as shown in figure 7-35 (b).
The top pressure type
(1) Gland type
It forms a seal with the opening of the barrel by pulling and pressing, and is suitable for the steel barrel with middle opening, as shown in Fig. 7-36.
(2) Bolt type
The top gland consists of a cover, a triangle ring, a washer, a bolt and a nut for use in a middle opening steel drum, as shown in figure 7-37.
Closed ring type
The sealing hoop is a kind of forming belt, which is used to fix the movable cover of the full opening steel drum and the shrinking neck steel drum. According to the different fixing devices, it can be divided into screw type sealing hoop and lever type sealing hoop.
(1) the screw type
A screw is used to connect both ends of the forming ring to realize the device for fixing the barrel cover, as shown in Fig. 7-38(a).
(2) the lever type
By connecting the two ends of the ring belt with a lever, the device for fixing the barrel cover can be realized as long as the handle is moved, as shown in Figure 7-38 (b).
Short comment: Xuheng Metal product sells most of the above type drum closures, feel free to ask quotations and specifications if needed.
Express Delay ReminderJune 30, 2022Express Delay Reminder:Some of our customer reflected that the international express is delayed, there are many reasons for that.The impact of COVID-19, many countries are not recovered from the epid...view
Market Demand Analysis And Raw Material Selection For Steel Drum PackagingJuly 1, 2022The barrel-making materials must meet the following requirements:(1) The barrel-making needs to use high-quality low-carbon steel, the material must have good plasticity and deformation stability, and...view
SWIFT Code Or IBAN?June 30, 2022Doing international trades may come down to bank transfer, which may need your bank SWIFT Code or IBAN. The two numbers are chosen among different regions across the world. The answer is as below:IBAN...viewEnvironmental Progress Of Steel Barrel SealerJuly 4, 2022The electroplating, coating and other processes of steel drums in the production process are the major causes of water pollution and air pollution.So in the cause of environmental protection, our stee...view
Cold Rolling: This Week The National Cold Rolling Spot Price Weak Shock, Poor Market Turnover.July 1, 2022Cold rolling: this week the national cold rolling spot price weak shock, poor market turnover.Fundamental point of view, from the fundamentals of cold rolling, supply recovery, weekly production of 82...view
Flex Spout CapMay 16, 2023The plastic oil drum cap and the stretch shrink cover of the oil pour port need to be welded together by a plastic welding process. The oil drum lid is made of PP and PE materials.The production proce...view
EN
ko 
fr 
de 
es 
it 
ru 
pt 
ar 
vi 
th 
